深圳市时代华南仪器有限公司
品质是生命,服务是宗旨

Quality is life, service is the tenet

网站首页  ◇  产品展示    ◇  无损检测仪 ◇   超声波测厚仪 > 超声测厚仪

超声测厚仪

发布时间:  2017-05-21

产品型号:  

产品报价:  

厂商性质:  生产厂家

所  在  地:  深圳市龙华新区大浪街道华荣路190号鹏翔大厦627室

产品特点:  35RDC 超声测厚仪 功能 Precision Thickness Gage TransducersContact TransducersDelay LineImmersion TransducersTest Blocks & Cables

同类产品
更多产品
产品概述

奥林巴斯35RDC 超声测厚仪  特征

  • For use on solid laminate structure aerospace composites
  • Simple one-button calibration
  • Thickness range 0.63 mm to 22.8 mm (0.025 in. to 0.900 in.)
  • Simple Good/Bad/Beyond Cal display readout
  • Back light matrix display with user help text
  • AA battery operation
  • Handheld, weighing only 0.24 Kg (8.5 oz.)
  • Energy saving Auto Power off feature
  • Long battery life, 150 hours typical
  • Battery life indicator

奥林巴斯35RDC 超声测厚仪 

 

参数Environmental IP65 compliantSplash-proof, impact-resistant case. Sealed, color-coded keypad
 Operating Temperature Range-10° C to +50° C (+14° F to 122° F)
 Size: (W x L x H)84 mm x 152 mm x 84 mm (3.31 in. x 6.0 in. x 1.50 in.)
 Weight0.24 kg (8.5 oz)
 Standard InclusionsWrist strap, 3 AA batteries, 5 MHz transducer, transducer cable, couplant, carrying case, rubber protective boot with neck strap, instruction manual, two-year limited warranty
 Display Modes
  • Digital Readout Good, Bad or Beyond CAL thickness
  • Advanced user setting shows A-scan or waveform. For use by qualified NDT personnel only.
 Thickness Measurement Range**0.63 mm to 22.8 mm (0.025 in. to 0.900 in.) 
** Thickness range depends on material, transducer, and surface conditions.
 Material VelocityFixed velocity for carbon fiber aerospace composite
 Transducer Frequency5.0 MHz
 Measurement Update Rate20 Hz
 Deviation alarm set pointsProgrammable +/- from calibration point. Set in advance setup
Power SupplyBattery3 AA alkaline or NiMH batteries
 Operating Time150 hours typical battery life; 30 hours continuous with backlight on
 Low Battery IndicatorContinuously indicates battery status
 Battery SaverAuto Power Off/Continuous On
 AC Power SupplyOptional

35RDC  附件

USB/ADP-115: AC-115 power supply 
USB/ADP-230: AC-230 power supply

*All specifications are subject to change without notice.

Olympus NDT offers a complete selection of transducers, cables, couplants, calibration test blocks, and accessories to meet a wide variety of ultrasonic precision thickness gaging applications.

Precision Thickness Gage Transducers

  • Contact Transducers
  • Delay Line
  • Immersion Transducers
  • Test Blocks & Cables

奥林巴斯35RDC  功能

     The handheld 35RDC is a simple Go/No-Go ultrasonic instrument designed to detect subsurface defects caused by impact damage on solid laminate aircraft composite structures. The 35RDC features a backlit LCD that displays the word GOOD if no subsurface damage is found or the word BAD when it detects subsurface damage. It uses an ultrasonic transducer that can be placed or scanned on the area of composite material suspected of having impact damage. Weighing only 0.24 Kg (8.5 oz.) and featuring a simplified keypad, this rugged ultrasonic instrument is easy to operate and requires minimal training.

 

 


留言框

  • 产品:

  • 留言内容:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 详细地址:

  • 省份:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
版权所有©2020 深圳市时代华南仪器有限公司
在线客服
扫一扫访问手机站扫一扫访问手机站
访问手机站